Independent guides. No sponsored rankings.How we make money →
Water Treatment ProCost guides
Service areas · local directory

Water treatment service near me

A metro-by-metro directory of water firms, with the state licence register and the local permit office you should check before hiring. No lead form, no call routing, and no paid placement.

Verified listings51 metros31 states1304 verified listings

Water treatment service near me

Enter your ZIP code, or let the browser find your location. We sort the service areas by straight-line distance and give you the nearest ones first. Nothing is sent to a server and nothing is tracked.

What qualifies as a listing

How listings are verified →

Before you call

Three checks that matter more than the quote

01 — LicenceCheck the register
  • Search the firm’s name and licence number.
  • Confirm the licence type covers waters.
  • Check the insurance and bond are current.
02 — PermitAsk who files it
  • A like-for-like swap is often exempt.
  • Changing the opening or header usually is not.
  • Get the permit number into the quote.
03 — QuotesCompare the same lines
  • Unit price and quantity.
  • Prep, disposal and permit fees.
  • Warranty and the date the price expires.
Cost

What water work costs

The national band below comes from the site’s cost guide, checked 2026-11-08. The metro range applies the editorial factors in the dataset and is rounded to $5; it is an illustrative planning band, not a local price survey.

JobNational rangeAcross these metrosWhat it includes
Whole-house softener, installed$2,500–$6,000$2,500–$6,000Typical US range
Whole-house filtration$3,500–$9,000$3,500–$9,000Typical US range
Well tank replacement$1,200–$2,800$1,200–$2,800Typical US range
Well pump replacement$900–$2,200$900–$2,200Typical US range
Reverse osmosis, installed$3,500–$8,000$3,500–$8,000Typical US range
Annual service, no salt$150–$400$150–$400Typical US range

Metro factors in this pilot range from 0.95 (Dallas) to 1.18 (Boston). The factor is an editorial estimate of labour and permit overhead, not a measured price index. Always get three written quotes for the same scope.

Directory

Browse water treatment service by metro

Each city page carries the local cost band, the state licence lookup, the permit office and the firm records. The state page groups the cities and repeats the licence and permit rules that apply across the state.

By state

AZ (3)CA (7)CO (2)DC (1)FL (3)GA (1)HI (1)IL (1)IN (1)KS (1)KY (1)LA (1)MA (1)MD (1)MI (1)MN (1)MO (1)NC (2)NE (1)NM (1)NV (1)NY (1)OH (2)OK (2)OR (1)PA (1)TN (2)TX (6)VA (1)WA (1)WI (1)

What changes from metro to metro

Licensing is the first difference. Washington, Oregon, California, Arizona, Georgia, Massachusetts and Minnesota license or register contractors at state level. Colorado, Texas and Illinois do not license general contractors statewide, so the city page points to the city register and the insurance check instead. The city page always links the register that actually applies, rather than a generic national lookup.

Permits are the second. A like-for-like panel or door replacement is usually exempt from a building permit; changing the opening, the header or the operator circuit usually is not. The city page links the permit office and states the common exemption, but the inspector has the final word.

Climate and housing stock decide what fails. Seattle’s damp air attacks hinges and bottom seals; Phoenix’s heat warps thin panels and cooks roller lubricant; Chicago and Minneapolis deal with freeze-thaw and frost heave; Boston’s older narrow openings leave little room for a ladder. The local notes on each city page explain the failure mode that matters there.

Cost is the last difference. The national band is the same everywhere; the metro factor is an editorial estimate. Use the band to sanity-check a quote, not to choose the cheapest number. A quote that is far below the band usually has a smaller scope, not a better price.

Local FAQ

Water treatment service near me: common questions

What is “water treatment service near me” on this site?

It is a directory of water firms, grouped by metro, with the address, phone number and services each firm publishes. The directory currently covers 1304 verified firms in 51 metros. It is not a lead-generation form, and no firm can pay for a place.

How are the listings verified?

A listing is checked against the firm’s own website and the state or city licence register named on its city page. The date of the last check is shown on the page. A record with no source and no date is not published as verified.

Which cities have a page?

A city page is created when the directory has at least one genuine listing in that city. One- and two-listing cities are allowed and are labelled as limited; a city with no listing is not given a page. Near-duplicate metro names are consolidated into one canonical city page.

How is the local cost band calculated?

The national range ($2,500–$6,000 for a torsion spring replacement, checked 2026-11-08) is multiplied by a metro labour-and-permit factor and rounded to $5. The factor is an editorial estimate, not a measured local price index. Treat the result as a planning band and get three written quotes.

Keep reading

Guides that make the quote easier to read

What water treatment service costs

Installed ranges by job, and the five lines every quote should show.

Cost guides →

Diagnose the problem first

Symptom to cause, what proves it, and what not to do first.

Problem guides →

How to choose a contractor

Licence, insurance, warranty and the questions that expose a thin scope.

Contractor guides →